More than sensors+automation
Search

Weld-In Thermowell (909710)

Features

  • For thermocouples and RTD temperature sensors
  • Thermometers can be replaced without emptying the system
  • Thermowells made of different materials
  • Operating pressure up to 450 bar (6500 PSI)
  • For operating temperatures up to 500 °C / 930 ˚F
  • Available with inspection certificate 3.1B

Description

Weld-in thermowells are used for installing thermocouples and RTD temperature sensors if replacement without emptying the system and/or pressure resistance is required.
Pressure resistance is temperature dependent and is specified in every position in the data sheet. The actual maximum sealable pressure over the screw thread depends on the mounting conditions and may be lower. The pressure information does not include a safety factor to allow for additional load capacity resulting from velocity.
Calculations of compressive strength depending on flow, temperature, and medium are available as a service.


Acceptance certificate:
3.1B, please specify when ordering if required.

Articles in stock (for more articles see data sheet)
Filter für Verkaufsartikel-Tabelle

Reduce the table of articles by filtering the features

Article number Product description Price / piece

Basic type: weld-in pocket, tapered, with male thread G 3/4

protection tube diameter: 12,00 mm

fitting length of thermometer in mm: 100mm

price on request

Basic type: weld-in pocket, tapered, with male thread G 3/4

protection tube diameter: 12,00 mm

fitting length of thermometer in mm: 160mm

price on request

Basic type: weld-in pocket, tapered, with male thread G 3/4

protection tube diameter: 12,00 mm

fitting length of thermometer in mm: 190mm

price on request

Basic type: weld-in pocket, tapered, with male thread G 3/4

protection tube diameter: 12,00 mm

fitting length of thermometer in mm: 220mm

price on request

Basic type: weld-in pocket, tapered, with female thread G 1/2 (DIN 16179, Form S)

protection tube diameter: 25,00 mm

fitting length of thermometer in mm: 160mm

price on request

Basic type: weld-in pocket, tapered, with female thread G 1/2 (DIN 16179, Form S)

protection tube diameter: 25,00 mm

fitting length of thermometer in mm: 250mm

price on request

Basic type: weld-in pocket, tapered, with female thread G 1/2 (DIN 16179, Form S)

protection tube diameter: 25,00 mm

fitting length of thermometer in mm: 160mm

price on request

Basic type: weld-in pocket, tapered, with female thread G 1/2 (DIN 16179, Form S)

protection tube diameter: 25,00 mm

fitting length of thermometer in mm: 250mm

price on request

Basic type: weld-in pocket tapered, with female thread M18x1,5 (DIN 43763, Form D1/D2)

protection tube diameter: 24,00 mm

fitting length of thermometer in mm: 65mm (L = 140mm for Form D1) and accordingly (L = 200mm for Form D4)

price on request

Basic type: weld-in pocket tapered, with female thread M18x1,5 (DIN 43763, Form D1/D2)

protection tube diameter: 24,00 mm

fitting length of thermometer in mm: 125mm (L = 200mm for Form D2) and accordingly (L = 260mm for Form D5)

price on request

Basic type: weld-in pocket tapered, with female thread M18x1,5 (DIN 43763, Form D4/D5)

protection tube diameter: 24,00 mm

fitting length of thermometer in mm: 65mm (L = 140mm for Form D1) and accordingly (L = 200mm for Form D4)

price on request

Basic type: weld-in pocket tapered, with female thread M18x1,5 (DIN 43763, Form D4/D5)

protection tube diameter: 24,00 mm

fitting length of thermometer in mm: 125mm (L = 200mm for Form D2) and accordingly (L = 260mm for Form D5)

price on request

Basic type: weld-in pocket tapered, with female thread M18x1,5 (DIN 43763, Form D1/D2)

protection tube diameter: 24,00 mm

fitting length of thermometer in mm: 65mm (L = 140mm for Form D1) and accordingly (L = 200mm for Form D4)

price on request

Basic type: weld-in pocket tapered, with female thread M18x1,5 (DIN 43763, Form D1/D2)

protection tube diameter: 24,00 mm

fitting length of thermometer in mm: 125mm (L = 200mm for Form D2) and accordingly (L = 260mm for Form D5)

price on request

Basic type: weld-in pocket tapered, with female thread M18x1,5 (DIN 43763, Form D4/D5)

protection tube diameter: 24,00 mm

fitting length of thermometer in mm: 65mm (L = 140mm for Form D1) and accordingly (L = 200mm for Form D4)

price on request

Basic type: weld-in pocket tapered, with female thread M18x1,5 (DIN 43763, Form D4/D5)

protection tube diameter: 24,00 mm

fitting length of thermometer in mm: 125mm (L = 200mm for Form D2) and accordingly (L = 260mm for Form D5)

price on request

Other interesting products