More than sensors+automation
Search

Temperature Controllers Overview

As with all JUMO automation components, our temperature controllers have been carefully produced by our in-house development department. Our development process draws on the wide-ranging expertise that our engineers have acquired over many decades. This is reflected in the outstanding technical features of the devices, closely tailored to match specific application areas. All compact controllers and process controllers are equipped with the proven JUMO control algorithms, making it possible to control even higher-order control paths. Integrated math and logic function expand the range of functions of the controllers and enable calculations, links, and evaluations to be performed that could previously only be implemented with the use of external auxiliary devices. High-end devices with a modular structure operate up to eight independent and freely configurable control channels.

JUMO frostTHERM-ATE (604170)
JUMO frostTHERM-ATE (604170) China RoHS-e

  • Setting range +1 to +10 °C
  • Operating mode: manual or automatic reset
  • Membrane heating for operation up to -15 °C
  • Self-monitoring of the probe line
  • Two analog outputs 0 to 10 V
  • One switching output (relay: max. AC 230 V 6(2) A)
  • Can be set without opening the case lid
  • Electrical connection via tension spring terminals
  • Operating voltage (SELV) AC 24 V

JUMO IMAGO F3000 - Process Control for the Meat Processing Industry (700101)
JUMO IMAGO F3000 - Process Control for the Meat Processing Industry (700101) UL / CRUUS

  • 315 × 171 and 171 × 315 mm formats
  • 5" color graphic display
  • Two-state/three-state continuous controller, three-step controller, continuous controller
  • 4 control channels
  • Inputs/outputs can be expanded in a modular structure
  • 99 programs with real-time clock
  • Math and logic function
  • Recording function
  • Modbus interface, PROFIBUS-DP interface

LR 316 - Laboratory controller in a desk-top case (700703)
LR 316 - Laboratory controller in a desk-top case (700703)

  • Wired ready for use
  • 2-state controller
  • Pt100, Pt1000, Fe-CuNi "L" or NiCr-Ni "K"
  • Load circuit up to 16A
  • Modbus port

JUMO eTRON T - Digital Thermostat (701050)
JUMO eTRON T - Digital Thermostat (701050) UL / CRUUS Metrological certification China RoHS-e

  • Design width 22.5 mm
  • Installation on DIN rail, 35 mm
  • Heating or cooling operation
  • LCD display
  • 10 A relay (changeover contact)
  • Configuration with setup program

JUMO exTHERM-DR Two-State Controller with Ex (ia) Input According to ATEX (701055)
JUMO exTHERM-DR Two-State Controller with Ex (ia) Input According to ATEX (701055) China RoHS-e Ex

  • Approval Ex II (1) G [Ex ia Ga] II C, Ex II (1) D [Ex ia Da] III C, IECEx
  • Controller output (relay)
  • Limit value output (relay) for alarm indication
  • Analog output configurable as actual value output, setpoint value output, or logic output for control of solid state relay
  • LCD display for process information
  • USB interface on front and setup program for simple startup

 

JUMO eTRON M - Electronic Microstat (701060)
JUMO eTRON M - Electronic Microstat (701060) UL / CRUUS Metrological certification China RoHS-e

  • 76 × 36 mm format
  • Heating or cooling operation
  • Defrosting function
  • Counters for operating hours and service
  • LCD display
  • Two relays
  • Configuration with setup program

JUMO eTRON M100 - Electronic Cooling Controller (701061)
JUMO eTRON M100 - Electronic Cooling Controller (701061) China RoHS-e

  • 76 × 36 mm format
  • Heating or cooling operation
  • Defrosting process electrically or with hot gas
  • Counters for operating hours and service
  • Real-time clock, Modbus interface, data logger
  • LCD display
  • Configuration with setup program

JUMO eTRON M100 Electronic 2-Channel Microstat (701066)
JUMO eTRON M100 Electronic 2-Channel Microstat (701066) China RoHS-e

  • 2 analog inputs for RTD temperature probes Pt100, Pt1000, KTY1X-6, or KTY2X-6 in 2-wire circuit
  • Available with a maximum of two 16 A relays and two 8 A relays
  • Optionally available with buzzer for acoustic alarm
  • Operating hours counter with integrated service counter
  • Available with data logger and RS485 interface.
  • Setup program to configure the device and evaluate the data logger.

JUMO Quantrol - Compact Controller (702030)
JUMO Quantrol - Compact Controller (702030) UL / CRUUS China RoHS-e

  • 48 × 48 mm, 48 × 96 mm, 96 × 96 mm formats
  • Two-state/three-state, continuous controller
  • Up to 5 outputs
  • Autotuning for exact PID control
  • RS485 interface (Modbus RTU)
  • Ramp and timer function
  • Firing curve for pottery kilns

JUMO iTRON - Compact Controller (702040)
JUMO iTRON - Compact Controller (702040) China RoHS-20 UL / CRUUS Metrological certification CSA

  • 48 × 24, 48 × 48, 48 × 96, 96 × 48, 96 × 96 mm formats
  • Two-state/three-state controller
  • Timer and ramp function

JUMO iTRON DR 100 - Compact Controller (702060)
JUMO iTRON DR 100 - Compact Controller (702060) UL / CRUUS Metrological certification China RoHS-e

  • Design width 22.5 mm
  • Installation on DIN rail, 35 mm
  • Two-state/three-state controller
  • LCD display  
  • Timer and ramp function

JUMO cTRON - Compact controller (702070)
JUMO cTRON - Compact controller (702070) China RoHS-20 UL / CRUUS

  • Formats 48x48, 48x96, 96x96mm
  • 2/3-state, 3-state modulating and continuous controller
  • Timer, ramp function
  • Modbus interface

JUMO dTRON 304/308/316 - Compact Controller with Program Function (703041/42/43/44)
JUMO dTRON 304/308/316 - Compact Controller with Program Function (703041/42/43/44) China RoHS-20 UL / CRUUS Metrological certification DIN

  • 48 × 48 mm, 48 × 96 mm, 96 × 48 mm, 96 × 96 mm formats
  • Two-state/three-state continuous controller, three-step controller, continuous controller
  • Inputs/outputs can be expanded in a modular structure
  • Timer/ramp/program function
  • Math and logic function
  • Modbus and PROFIBUS DP interface
  • Approval DIN EN 14597

JUMO dTRON 304/308/316 - Compact Controller for the Plastics Industry (703046)
JUMO dTRON 304/308/316 - Compact Controller for the Plastics Industry (703046) China RoHS-20 UL / CRUUS

  • 48 × 48 mm, 48 × 96 mm, 96 × 96 mm formats
  • 2-state/3-state continuous controller, three-step continuous controller
  • Inputs/outputs have modular extensibility
  • Special functions for plastics processing machines
  • Math and logic function
  • Interface for Modbus master/slave, current 0/20 mA, PROFIBUS-DP

JUMO DICON touch - Two-Channel Process and Program Controller with Paperless Recorder and Touchscreen (703571)
JUMO DICON touch - Two-Channel Process and Program Controller with Paperless Recorder and Touchscreen (703571) China RoHS-20 UL / CRUUS PROFINET DIN

  • 96 × 96 mm format
  • Precise control of two processes
  • Paperless recorder for tamper-proof data backup
  • Easy-to-use program generator control and program entry
  • Interfaces: USB host, USB device, Modbus, PROFIBUS DP, PROFINET RT, Ethernet
  • Individual, interactive process screen
  • Security through password-protected user management

JUMO IMAGO 500 - Multichannel Process Controller and Program Controller (703590)
JUMO IMAGO 500 - Multichannel Process Controller and Program Controller (703590) China RoHS-20 UL / CRUUS

  • 144 × 130 mm format (installation dimensions 92 × 92 mm)
  • 5" color graphic display
  • Two-state controller, three-state controller, three-step controller, position controller, continuous controller
  • 8 control channels
  • Inputs/outputs have modular extensibility
  • 50 programs with real time clock
  • Math and logic functions
  • Recording function
  • Modbus interface, PROFIBUS-DP interface

JUMO diraTRON 104/108/116/132 - Compact Controller
JUMO diraTRON 104/108/116/132 - Compact Controller

  • Fixed value or program controller
  • Two parameter blocks
  • Autotuning
  • Setpoint changeover (four setpoint values)
  • Ramp function
  • Timer function
  • Four limit values are monitored
  • Service counter
  • Individual operator level
  • Separate application using structured text (ST code; option)
  • Math and logic function (option)
  • Fast wiring through Push-In technology
  • RS485 interface (option)
  • Additional analog and digital inputs via RS485 interface