JUMO AQUIS 500 AS - indicator / controller for standard signals (20.2568)
Features
- Display: mg/l, pH, mV, µS/cm etc.
- Special measuring range can be adjusted with setup program
- Choice of display mode: large numbers, bargraph or trend display
- Integrated calibration routines for 1- and 2-point calibration
- Calibration logbook
- Language changeover: German, English, French
- Further languages can be loaded via setup program
Applications
Display, measurement and control of
- free chlorine, hydrogen peroxide, peracetic acid, chlorine dioxide, ozone in connection with probes as per TB 20.2630
- pH value or Redox potential with 2-wire transmitter as per TB 20.2701
- Filling levels (hydrostatical) with 2-wire transmitter as per TB 40.2090 or 40.4390
- Throughflow in connection with the respective transmitters
- 2 temperature measuring points
- Probes and transducers with standard signal 0/4...20mA or 0...10V
Description
The device is equipped with 2 analog and 1 binary inputs. The first analog input is suitable for the connection of standard or standardized signals (0/4...20mA or 0...10V), which can be provided by any probe. RTD temperature probes Pt100, Pt1000 or NTC/PTC (up to 4kOhm) can be connected to the second analog input. The voltage supply for a 2-wire transmitter is integrated into the device.
The graphical display allows to display the standard signals as numbers or bargraph. The parameter display in plain text ensures that operation is easily understandable and safe. 2 optional relay change-over contacts are used to realize simple switching or alarm functions as well as complex control tasks with P, PI, PD and PID behavior. On request, the device is also available with two analog outputs (0/4...20mA or 0...10V) that can be freely parameterized and scaled.
Documentation
Software
Please take note of our General Terms and Conditions and Clauses for Paragraph 1.4 General Terms and Conditions.
| Article number | Product description | Price of the full version |
|---|---|---|
| 00483602 |
JUMO Setup AQUIS 500 Download 30-Tage-Testversion (49.5 MB) additional information |
price on request |
Accessories
Accessory articles
| Article number | Product description | Price / piece |
|---|---|---|
| 00398161 | Protection cover for JUMO AQUIS 500/dTrans O2 | price on request |
| 00398163 | Support pillar with pedestal base, arm and chain | price on request |
| 00453191 | Joint for suspended fitting | price on request |
| 00456352 | PC interface with converter USB/TTL | price on request |
| 00477842 | Mounting for DIN rails for JUMO AQUIS 500 | price on request |
| 00483664 | Pipe mounting set for JUMO AQUIS 500 | price on request |
| 00506351 | Rear panel set for JUMO-AQUIS 202560/65/66/68 Leitfaehigkeits-Messumformer | price on request |
Articles in stock
| Article number | Product description | Price / piece | |
|---|---|---|---|
| 00528718 |
model: JUMO AQUIS 500 AS surface mount. housing output 1: analog output, programmable output 2: analog output, programmable output 3: relay (changeover) output 4: relay (changeover) power supply: AC 110..240V +10/-15%,48..63Hz input: freely programable inputs |
price on request | |
| 00528719 |
model: JUMO AQUIS 500 AS surface mount. housing output 1: analog output, programmable output 2: not used output 3: relay (changeover) output 4: not used power supply: AC 110..240V +10/-15%,48..63Hz input: freely programable inputs |
price on request | |