More than sensors+automation
Search

JUMO Wtrans T - RTD Temperature Probe with Wireless Data Transmission (902930)

Features

  • For stationary and mobile measurements
  • Measuring ranges: -30 to +260 °C or -200 to +600 °C
  • Radio frequency: 868.4 MHz or 915 MHz
  • Also available with ATEX approval
  • Open air range up to 300 m
  • No wiring work required due to modern wireless technology
  • Fail-safe transmission with telegram coding
  • Battery status monitoring
  • Configurable with easy-to-use PC setup program
  • Optionally available in combination: analog output, serial interface, and relay contact with associated mounting rail receiver
  • Configurable transmission interval (1 to 3600 s)
  • Configurable transmitter detection
  • Customer-specific linearization (40 pairs of value or 4th order polynomial)
  • Online chart function for recording of measured values directly on the PC

Customer benefits

  • No wiring work required due to modern wireless technology
  • Fail-safe transmission with telegram coding

Description

The Wtrans transmitter is used in connection with a Wtrans receiver for stationary or mobile detection of temperatures within the operating range of -30 to +260 °C or -200 to +600 °C. This measured temperature value is transmitted wirelessly to the receiver of the Wtrans measuring system; here it is displayed and available digitally at the RS485 interface as well as an analog output. One receiver variant can signal various alarms on two relay outputs.
The transmission electronics of the RTD temperature probe are placed in the case so that they are vibration-proof; the case is oil-resistant and acid-proof. The ambient temperature of the case may either be from -30 to +85 °C or -25 to +125 °C. The protection type is IP67. A durable lithium battery with 3.6 V is used for voltage supply.
The radio frequencies of the Wtrans measuring system (868.4 MHz or 915 MHz) are largely impervious to external interferences and allow transmission even in a rough industrial environment. When using the antenna wall holder with the 3 meter cable for the receiver then the maximum open air range is 300 m. The stainless steel protection tube with the Pt1000 temperature sensor according to DIN EN 60751, class A in a three-wire circuit is available with a flat, oblique, or centered probe tip. The insertion length extends from 30 to 10000 mm. Variants are available with an extension tube or an M12 × 1 plug connection to connect Pt1000 RTD temperature probes.
The Wtrans transmitter is also available as a version with ATEX approval (basic types 902930/15, .../17, .../55). These devices can be installed directly in potentially explosive areas up to zone 0. The receiver is installed outside the Ex zone. The wireless data transmission from the Ex area avoids costly installations with cable and protection barrier or supply isolators.
The design type of the JUMO RTD temperature probes is to be coordinated when ordering. The Ex variant with M12 connector is always delivered with an approved JUMO RTD temperature probe with PTFE connection cable. Devices with process connections can be ordered in versions with Ex zone separation.
A setup program is available as an accessory for easy configuration and parameterization of the Wtrans measuring system on the PC. The OnlineChart function can be used optionally to record the measured values on the PC.


Take a look how easily the JUMO Wtrans system can be configured.

Documentation
Declaration of Conformity
Certificate of non-objection
Software

Please take note of our General Terms and Conditions and Clauses for Paragraph 1.4 General Terms and Conditions.

Article number Product description Price of the full version
00488887

Setup-Program Wtrans

Download  216.exe (30 days Test Version)  (82.4 MB)

additional information
price on request
Accessories

Accessory articles

Article number Product description Price / piece
KBAT Battery-Set 3,6 V/2100 mAh Lithium neutr(85C) BATTERY price on request

(in stock)

Set Wtrans case sealing 2 x 3 pieces price on request
Color rings Wtrans probe 902930 complete Farbringe price on request

(in stock)

Wtrans-color cap probe(PEI)(10 pieces, grey) price on request
Wtrans-color cap set probe(PEI)(10 pieces, brown) price on request
Wtrans-color cap set probe(PEI)(10 pieces, green) price on request
Wtrans-color cap set probe(PEI)(10 pieces, blue) price on request
PC interface with converter USB/TTL price on request
SET Wall holder Wtrans probe protection tube 4mm price on request

(in stock)

SET Wall holder Wtrans probe protection tube 4,5mm price on request

(in stock)

SET Wall holder Wtrans probe protection tube 6mm price on request

(in stock)

SET Wall holder Wtrans probe protection tube 12mm price on request

(in stock)

Connector 4pole Series 713 Binder price on request

(in stock)

902150/30-386-1006-2-6-100-56-2500/315,317 price on request

(in stock)

902150/30-386-1006-2-6-200-56-2500/315,317 price on request

(in stock)

Battery-Set 3,6 V/1700 mAh Lithium (+125°C) BATTERY price on request

(in stock)

Activation for OnlineChart price on request
Tube screw connection G 1/4A Verschraubung price on request
Tube screw connection G 3/8A Verschraubung price on request
Fitting compression G1/2 6 mm tube Klemmverschraubung price on request
Fitting compression G 3/4 D=6mm price on request
Fitting pipe M8 x 1,0 price on request
Tube screw connection M10x1 Klemmverschraubung price on request
Tube screw connection 1/2 -14 NPT Verschraubung price on request
Flange Iø 6,3 height 14mm price on request

Accessory product data sheets

Article number Product description Price / piece

Basic type: Wtrans probes T01.G1 RTD insertion temperature probes, ambient temperature, handle: -30..+85°C

operating temperature: -30..260°C

diameter of protection tube: 4mm

fitting length: 100mm

insertion tip: centric, angle 25°

transmitter frequency: SRD band 868,4 MHz (Europe)

process connection: without process connection

price on request

Basic type: Wtrans probe T02.G1, ambient temperature, handle: -25..+125°C

operating temperature: -30..260°C

diameter of protection tube: 4mm

fitting length: 100mm

insertion tip: centric, angle 25°

transmitter frequency: SRD band 868,4 MHz (Europe)

process connection: without process connection

price on request

Basic type: Wtrans probes T01.G2 with M12 connector for RTD temperature probes(ambient temperature, handle: -30..+85°C

operating temperature: -200..600°C

diameter of protection tube: no (not relevant)

fitting length: no (not relevant)

insertion tip: without protection tube

transmitter frequency: SRD band 868,4 MHz (Europe)

process connection: without process connection

price on request

Basic type: Wtrans-probe T02.G2 mit M12-connector for RTD temperature probe, ambient temperature, handle: -25..+125°C

operating temperature: -200..600°C

diameter of protection tube: no (not relevant)

fitting length: no (not relevant)

insertion tip: without protection tube

transmitter frequency: SRD band 868,4 MHz (Europe)

process connection: without process connection

price on request

Sie können hier ein CAD Modell des Artikels herunterladen. Wählen Sie dazu zuerst das bevorzugte Dateiformat aus.


2D-Format:
oder
3D-Format:

Other interesting products